Making Copies with Sheets of Paper Interleaved between
Transparencies (Transparency Interleaving)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Transparency Interleaving," on p. 4-28.
IMPORTANT
•
Even if an optional finisher is attached, you cannot use any of the Finishing modes with
the Transparency Interleaving mode.
•
Only LTR is available for the Transparency Interleaving mode.
1
7
7-76
Process/Layout Settings
Press [Process/Layout] ➞ [Transparency Interleaving].
If you selected [Transparency], press [Overhead Project. Type] and select either
[Transmissive] or [Reflective].