Collating Copies into Groups of the Same Page (Group)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Same Page (Group)," on p. 3-39.
IMPORTANT
•
The Finishing modes cannot be set if [Envelopes], [Transparencies], [Tracing Paper], or
[Labels] is selected as the paper type.
•
If you set the Hole Punch mode, the side of the paper which is printed on will always be
output face down.
•
The Hole Punch mode is available only if the optional Finisher-Y1 or Saddle Finisher-Y2
and Puncher Unit-M1 are attached to the Color imageRUNNER C3480/C3480i/C3080/
C3080i. (The optional Finisher-Y1, Saddle Finisher-Y2, and Puncher Unit-M1 are not
available for the Color imageRUNNER C2550.)
1
7
7-28
Making a Copy With the Express Copy Basic Features Screen
Press [Group].
The optional Finisher-Z1 is attached.
Press [Collate Not Set] if you do not want to collate the output.
If you want the copies slightly offset vertically in the output tray, press [Offset].
The optional Finisher-Z1 is attached.
Collate Not Set
Group
Offset