Erasing Shadows and Frame Lines from Copies (Frame
Erase)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Frame Erase," on p. 4-41.
Making Copies by Erasing the Frame around the Original (Original
Frame Erase)
1
Press [Process/Layout] ➞ [Frame Erase].
2
Press [Original Frame Erase] ➞ select the original size ➞ set
the frame width area to erase by pressing [-] or [+].
The frame area is erased evenly (based on the value you set) around each edge
of the original. To set different frame erase width values for the top, right, left, and
bottom sides of the original independently, press [Adjust Each Dim.].
If you press [Adjust Each Dim.], select the frame erase values by pressing [-] or
[+].
IMPORTANT
You can set the Original Frame Erase mode only for the original paper sizes shown
on the touch panel display.
3
Press [Done].
Process/Layout Settings
7
7-73