Copy Set Numbering
Copying
1
2
3
4
4-100
Page and Copy Set Numbering
Place your originals ➞ press [Special Features] ➞ [Pg/Copy
Set Numbering].
Press [Copy Set Numbering].
Select the orientation and the position of the copy set
numbers ➞ press [Next].
Press [Full Surface] to print the copy set number repeatedly over the surface of
the output.
Press [Numbers in 5 Locations] to select all five print positions.
NOTE
•
If Copy Set Numbering Option Settings in System Settings (from the Additional
Functions screen) is set to 'On', [Full Surface] and [Numbers in 5 Locations] are
grayed out and cannot be selected. (See Chapter 6, "System Manager Settings," in
the Reference Guide.)
•
If you set any two of the Page Numbering, Copy Set Numbering, Watermark, or
Print Date modes to print in the same position, a message asking for your
confirmation is displayed when you press
● If [Adjust Position] is selected:
❑
Press [X] and [Y] ➞ press [-] or [+] to set their respective positions ➞ press
[OK].
(Start).