Canon Color imageRUNNER C3480 Manual page 368

7
7-52
Book/Page Edit/Shift Settings
If you selected the paper to use for the main document from [Stack Bypass
Settings], select the paper size and press [Next] ➞ select the paper type and
press [OK] ➞ press [Done]
❑
If you want to add a cover, press [Add Cover].
Select whether to print on the cover and the paper source to use for the cover
➞ press [OK].
If you selected the paper to use for the cover from [Stack Bypass Settings],
select the paper type ➞ press [Done].
IMPORTANT
•
The paper used for the cover page must be the same paper size as that which is
used for copying the main document.
•
If you are using Heavy 1 or Heavy 2 paper for the cover sheets, you can only print
on the inside of the front cover or inside of the back cover.
•
17 to 28 lb bond (64 to 105 g/m
•
Only the following paper can be used for the cover pages, if you are printing on the
cover pages:
- If [Print] is selected for <Front Cover> or <Back Cover>:
17 to 28 lb bond (64 to 105 g/m
- If [Print] is selected for <Front Inside Cover> or <Back Inside Cover>:
17 lb bond to 80 lb cover (64 to 220 g/m
❑
Select whether to saddle stitch the booklet.
❑
If you select [Divided Booklet], enter the number of sheets that you want to
divide by pressing [-] or [+] ➞ press [OK].
❑
If the printing position of the image is out of place, and you want to set the
creep (displacement) correction, press [Creep Correct] ➞ select [Auto] or
[Manual] ➞ press [OK].
If you select [Manual], press [ ] or [ ] to adjust the correction width.
IMPORTANT
The maximum number of sheets, including cover sheets, that can be saddle
stitched is:
- 15 sheets (17 to 20 lb bond (64 to 80 g/m
- 10 sheets (20 to 28 lb bond (81 to 105 g/m
2 ) paper can be used for the main document.
2
)
2 )
2
))
2
))