Changing The Copy (Zoom) Ratio; Preset Zoom - Canon Color imageRUNNER C3480 Manual

Changing the Copy (Zoom) Ratio

You can set the machine to adjust the copy (zoom) ratio automatically, or you can
specify the copy (zoom) ratio manually.
IMPORTANT
For information on the modes which cannot be set in combination with this mode, see
"Combination of Functions Chart," on p. 9-6.
NOTE
To set the copy (zoom) ratio to 100%, press [Direct].

Preset Zoom

The machine offers you a variety of preset copy (zoom) ratios to reduce or enlarge
standard size originals to another standard paper (record) size.
IMPORTANT
•
Place the originals horizontally in the following cases:
- If you are enlarging LTR originals to 11" x 17"
- If you are enlarging STMT originals to 11" x 17" (when the original is placed on the
platen glass)
•
If you are reducing 11" x 17" originals to LTR with Auto Orientation in Copy Settings (from
the Additional Functions screen) set to 'Off', load LTRR paper in a paper drawer or the
stack bypass.
NOTE
Placing an original horizontally means setting the original with the longer side sideways.
(See Chapter 2, "Basic Operations," in the Reference Guide.)
■ Reduction
The available preset copy (zoom) ratios for reducing originals are:
LGL ➞ LTR (78%)
•
11" x 17" ➞ LGL or 11" x 15" ➞ LTR (73%)
•
11" x 17" ➞ LTR (64%)
•
11" x 17" ➞ STMT (50%)
•
•
Minimum (25%)

Changing the Copy (Zoom) Ratio

3
3-9