Operations; Iv. Operations; A. Original Set Indicator; Making Copies - Canon DADF-B1 Service Manual

IV. OPERATIONS

A. Original Set Indicator

The Original Set indicator turns on when an original is on the original tray, and it starts to flash
when a jam occurs.
B. Making Copies
1) Adjust the slide guides to suit the size of the originals.
2) Place the stack of originals against the end plate of the original tray with the first page on top.
3) Set the copier to the appropriate copying mode.
4) Press the copier's Copy Start key.
C. Warnings and Actions
You can suspect an original jam if the Original Set indicator has started to flash. Make the
following checks, and take the appropriate actions:
1) Open the pickup unit cover and the reversal delivery unit; then, remove any original jam.
2) Remove the originals from the original tray.
3) Open the ADF, and remove any original jam.
4) Remove any original from the copyboard glass.
5) Close the ADF.
6) Put the originals back into order, and place the stack on the original tray once again.
7) Press the copier's Copy Start key.
COPYRIGHT © 1999 CANON INC. CANON DADF-B1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPITON
Figure 1-401
1-5