7
Specify the amount of space between repeated images using
[-] and [+].
● If you want to set the same amount of space for all four sides:
❑
Press [-] or [+] to set the amount of space ➞ press [OK].
● If you want to set the top, left, right, and bottom spaces
independently:
❑
Press [Independent Adjustment].
❑
Select the space to adjust ➞ press [-] or [+] to set its size ➞ press [OK].
To return to the screen for setting the same amount of space for all four sides,
press [Uniform Margin].
8
Press [OK].
If you need to designate the same area for multiple originals using the edit pen,
remove the original from the platen glass after specifying the area ➞ place all of
the originals in the feeder ➞ press
Mirror Image
This mode enables you to copy the original image reversed, as if it were a reflection
in a mirror.
NOTE
The Mirror Image mode is available for the Copying function only.
1
Place your originals ➞ press [Special Features] ➞ [Image
Creation].
2
Press [Mirror Image].
(Start).
Original
Copy
Using Image Creation Modes
4
4-61