Canon Color imageRUNNER C3480 Manual page 196

3
4
4
4-18
Cover/Job Separator
Select the paper source for each selected feature ➞ press
[Done] ➞ [Next].
If only [Job Separator] is selected, select the paper source for the job separator
sheets ➞ press [Done] ➞ [OK].
IMPORTANT
•
Select the same paper size for [Front Cover], [Back Cover], and [Job Separator].
•
If you try to set a different paper size for one feature, the paper sizes for the other
features are automatically changed to the new paper size. However, if you are
switching to another paper source with the same paper size, the settings for the
other features will not change.
Select the side(s) to be printed for the front and/or back cover
➞ press [OK].
NOTE
•
The screens that appear on your machine may differ depending on the setting in
step 2.
•
If you select [Leave Blank] for the front and/or back cover, the machine inserts a
sheet of paper from the paper source that you selected in step 3 to be used as the
print's front and/or back cover.
- If you are using paper that already has printing on it (e.g., company logo) as your
front and/or back cover, you must select [Leave Blank].
•
If you select [Print on Front Side], [Print on Back Side], or [Print on Both Sides] for
the front and/or back cover, the machine inserts a sheet of paper from the paper
source that you selected in step 3, and prints your original on its front side, back
side, or on both sides. This will then be used as the print's front and/or back cover.