2
Press [Set].
To switch the paper source for transparencies, press [Paper Select] ➞ select the
paper source.
If the following screen is displayed, perform either of the following procedures in
Common Settings (from the Additional Functions screen) (See Chapter 4,
"Customizing Settings," in the
•
Set Register Paper Type for the selected paper source to 'Transparency'.
•
Set the paper type setting to 'Transparency' if Stack Bypass Standard Settings
is set to 'On'.
IMPORTANT
Make sure that transparencies are loaded into the selected paper source. Loading
paper types other than transparencies may result in a paper jam.
3
Specify the settings for the interleaf sheets.
❑
Decide whether to copy on the interleaf sheet, or leave the interleaf sheet
blank.
❑
Press [Paper Source of Interleaf Sheet] ➞ select the size of the interleaf
sheets.
4
Press [Done].
Reference Guide
.):
Process/Layout Settings
7
7-77