Canon Color imageRUNNER C3480 Manual page 82

2
2
2-26
Paper Selection
Select the desired paper size.
IMPORTANT
If you want to print a scanned document whose size has been specified as [11 x
17+] in Document Size Select, load the stack bypass with 12 5/8" x 17 11/16" or
12" x 18" paper, or load a paper drawer with 12" x 18" paper.
NOTE
•
If you select [Envelope], [Tracing Paper], [Transparency], or [Labels], you cannot
specify any Finishing modes (Collate, Group, or Staple).
•
If Stack Bypass Standard Settings in Common Settings (from the Additional
Functions screen) is set to 'On', and the paper size/type have been stored, the
selected paper size/type are displayed on the screen. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
● If you want to set the machine to automatically select a paper size:
❑
Press [Auto].
If you selected [Transparency], press [Overhead Project. Type] and select
either [Transmissive] or [Reflective].
● If you want to select a paper size manually:
❑
Select the desired paper size.
NOTE
•
The paper sizes/types are indicated by icons on the touch panel display, in the
order in which they are loaded in the paper drawers.
•
Icons indicating the type of paper loaded in each paper drawer can be displayed on
paper selection screens, if you store that information into the machine beforehand.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)
•
indicates that the paper is set vertically, and
horizontally. The suffix <R> (such as in LTRR) used in paper size designations
indicates that the paper is loaded in a paper drawer or the stack bypass
horizontally.
indicates that the paper is set