Canon Color imageRUNNER C3480 Manual page 71

5
Press [Scan].
6
Specify the desired scan settings.
IMPORTANT
When the Auto-Color Select mode is set and your originals contain color sections,
the machine copies them in the Full Color mode. However, the machine may copy
the color originals in the Black mode under the following conditions. To avoid this,
set the color mode to 'Full Color'. (See "Changing Color Modes," on p. 3-56.)
- If the originals contain a few color sections
- If the color sections are located only on the left side (within 3/8" (10 mm) from the
left edge) of the originals when loading the originals in the feeder
- If the color sections of the originals are close to black
- If the originals contain light color densities
NOTE
•
To adjust scan exposure and select original type, see "Exposure and Original Type
Settings," on p. 3-2.
•
To change zoom ratio, see "Changing the Copy (Zoom) Ratio," on p. 3-9.
•
To scan two-sided originals, see "Scanning Two-Sided Originals," on p. 3-54.
•
To switch between the Full Color and Black modes, see "Changing Color Modes,"
on p. 3-56.
•
Additional scan settings are available by pressing [Special Features].
•
You can set various modes when scanning originals, similar to the Copy function.
Flow of Mail Box Operations
2
2-15