Recalling Previous Copy Jobs
You can recall the three most recent copy jobs and make copies using these
settings.
IMPORTANT
•
The machine considers any one of the following operations a copy job:
- When copy settings, such as the copy ratio, number of copies, and copy exposure, are
- If and when the Auto Clear mode activates after copy settings are specified
- When the time set for Auto Sleep Time in Timer Settings (from the Additional Functions
5
- If you recall copy settings stored in Mode Memory
Therefore, if you make settings but do not press the control panel power switch,
(Start), or
made are not stored memory for recall by pressing [Recall].
•
You cannot recall the Job Block Combination mode.
•
The Standard mode is not stored in Recall memory.
•
Identical copy settings are stored only once in Recall memory.
NOTE
•
The Recall mode is available for the Copying function only.
•
Once stored, the last three copy jobs are kept in memory even if the power is turned OFF.
1
2
5-2
Recalling Previous Copy Jobs
specified and then, the control panel power switch,
screen) has elapsed
(Reset), and the Auto Clear mode does not activate, the settings you have
Place your original ➞ press [Special Features] ➞ [Recall].
Select [1 Before], [2 Before], or [3 Before].
(Start), or
(Reset) is pressed