3
Making Copies of a Designated Area (Area Designation)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Area Designation," on p. 4-62.
IMPORTANT
•
To use Area Designation (Framing) with the Image Repeat mode, first specify the Image
Repeat mode, and then designate the desired area. Only one area can be designated.
•
If the designated area is too small, the color original may be scanned in the Black mode
even if the color mode is set to 'Auto-Color Select'.
Using the Edit Pen
7
IMPORTANT
•
You can designate only one polygonal area at a time.
•
You cannot designate a rectangular area and a polygonal area at the same time.
•
You cannot copy or scan documents with the Area Designation mode if you place your
originals in the feeder.
1
2
7-68
Process/Layout Settings
❑
Select the background pattern, color, and size of the text.
To use white letters on a colored background, press [White Letters on Colored
Background].
To change the orientation of characters, press [Print Characters Vertically].
Press [Done].
Press [Process/Layout] ➞ [Area Designation].
Press [Pen Entry].