Making Copies (Scanning) with Different XY Copy/Zoom Ratios (XY
Zoom)
■ Copying
1
3
2
3
4
3-20
Changing the Copy (Zoom) Ratio
Place your originals ➞ press [Copy Ratio].
If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p.
3-9.
Press [Zoom Program].
If necessary, see the screen shot in step 2 of "Copying" in "Making Copies
(Scanning) with the Same XY Copy/Zoom Ratio (Zoom)," on p. 3-18.
Press [XY Zoom].
Use the numeric keys on the touch panel display to enter
values for the original size and copy (record) size.
❑
Press [X] (horizontal axis) for Original Size ➞ enter a value.
❑
Press [Y] (vertical axis) for Original Size ➞ enter a value.
❑
Press [X] (horizontal axis) for Copy Size ➞ enter a value.
❑
Press [Y] (vertical axis) for Copy Size ➞ enter a value.
❑
Press [OK].
If the computation results in a zoom ratio less than 25% or greater than 400%,
a message appears telling you that values below 25% will be set to 25%, and
values above 400% will be set to 400%.