Canon Color imageRUNNER C3480 Manual page 30

4
1
5
1-8
Flow of Copy Operations
Specify the desired copy modes on the Copy Basic Features
screen.
IMPORTANT
When the Auto-Color Select mode is set and your originals contain color sections,
the machine copies them in the Full Color mode. However, the machine may copy
the color originals in the Black mode under the following conditions. To avoid this,
set the color mode to 'Full Color'. (See "Changing Color Modes," on p. 3-56.)
- If the originals contain a few color sections
- If the color sections are located only on the left side (within 3/8" (10 mm) from the
left edge) of the originals when loading the originals in the feeder
- If the color sections of the originals are close to black
- If the originals contain light color densities
NOTE
On the Copy Basic Features screen, you can select the color mode, paper size and
type, copy exposure, original type, copy ratio, 2-sided mode, and the desired
Finishing mode.
Set the desired copy modes on the Special Features screen.
❑
Press [Special Features].