NOTE
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to
'On', the Collate or Offset Collate mode is automatically set when you place your
originals in the feeder. (See "Auto Collate," on p. 8-9.)
2
Press [Collate (Page order)].
The optional Finisher-Z1 is attached.
A finisher is not attached or only the
optional Inner 2way Tray-D1 is attached.
If you want to make hole punches, press [Hole Punch].
The optional Finisher-Y1 or
Saddle Finisher-Y2 and
Puncher Unit-M1 are attached.
Collating Copies/Prints
3
3-37