Feeding Different-Sized Originals Together in the Feeder
(Different Size Originals)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Different Size Originals," on p. 4-49.
IMPORTANT
•
All originals placed together in the feeder must be the same weight (paper type).
•
Align the top edge of the originals with the back edge of the feeder if you are placing
originals with different widths.
•
Set different size originals with different widths and lengths in the following combinations.
Other combinations may damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR
•
If you place originals with different widths in the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned and copied as
slanted.
•
If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
•
Stapling cannot be performed if you place originals with different widths.
7
1
2
3
7-44
Scan Originals Settings
Press [Scan Originals] ➞ [Different Size Originals].
Select the type of originals.
Press [Done].