Recalling A Previous Copy Setting (Recall) - Canon Color imageRUNNER C3480 Manual

Recalling a Previous Copy Setting (Recall)

For instructions on this procedure using the Regular Copy Basic Features screen,
see "Recalling Previous Copy Jobs," on p. 5-2.
IMPORTANT
7
•
One copy job is defined by setting the number of copies, exposure, zoom, etc., and by
pressing the control panel power switch,
function is 'On', when the time set for Auto Sleep Time in Timer Settings has elapsed, or
by calling up a copy job stored in memory. If one of these keys was not pressed, or if the
Auto Clear function is not active, calling up a copy job by pressing [Recall] is not possible.
•
You cannot recall the Job Block Combination mode.
•
The Standard mode cannot be recalled or stored.
•
Identical copy modes that are stored, are counted as one setting.
1
7-36
Making a Copy With the Express Copy Basic Features Screen
•
To make two-sided copies, press [2-Sided Copy]. (See "Making Two-Sided
Copies from One-Sided Originals (1 to 2-Sided), " on p. 7-22, "Making
Two-Sided Copies from Two-Sided Originals (2 to 2-Sided)," on p. 7-23, or
"Making One-Sided Copies from Two-Sided Originals (2 to 1-Sided), " on p.
7-24.)
•
To set a margin for binding, press [Margin]. (See "Making Copies with Margins
(Margin)," on p. 7-60.)
•
To make color balance adjustments, press [Color Balance]. (See "Adjusting the
Color (Color Balance)," on p. 7-83.)
•
To embed hidden text in the background, press [Secure Watermark]. (See
"Embedding Hidden Text in the Background," on p. 7-67.)
If you print one sample set and then change the settings, the machine will print
from the first set with the new settings.
If you want to check the changes that you have made, press [Sample Set] ➞
repeat the procedure from step 2.
Press [Recall].
(Start) or (Reset), when the Auto Clear