Transparency Interleaving - Canon Color imageRUNNER C3480 Manual

Transparency Interleaving

When copying onto transparencies, this mode enables you to automatically add an
interleaving sheet of paper between each sheet of transparency that is output. The
interleaf sheets protect the copied surface of the transparencies. You can also set
to copy the content of the transparencies onto interleaf sheets.
IMPORTANT
•
For information on the modes which cannot be set in combination with this mode, see
"Combination of Functions Chart," on p. 9-6.
4
•
Even if an optional finisher is attached, you cannot use any of the Finishing modes with
the Transparency Interleaving mode.
•
Only LTR is available for the Transparency Interleaving mode.
NOTE
•
The Transparency Interleaving mode is available for the Copying function only.
•
The machine's counter does not count blank interleaf sheets as copies.
•
If Tray Designation settings are set only for Copy Tray-J1, transparencies are output to
Tray A. The Tray Designation settings may vary depending on the optional output units
that are attached to the machine. For details on the tray designations, see Chapter 4,
Customizing Settings," in the Reference Guide."
■ If You Do Not Want to Print on the Interleaf Sheets:
The [Leave Blank] setting outputs a printed transparency and a blank interleaf sheet
alternately.
4-28

Transparency Interleaving

Originals
Blank Interleaf Sheets
Copies
Transparencies