Flow of Copy Operations
1
This section describes the flow of basic copy operations.
NOTE
•
Before using the Copy function, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
- Entering characters from the touch panel display (See Chapter 2, "Basic Operations," in
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
•
If you are using a login service, log in and log out using the procedure for the login
service you are using before and after operating the machine.
- If you are using Department ID Management with the optional Card Reader-C1, see
- If you are using Department ID Management, see Chapter 2, "Basic Operations," in the
- If you are performing user authentication using the SDL or SSO login service, see
•
To cancel all settings, press
1
1-6
Flow of Copy Operations
Machine," in the Reference Guide.)
the Reference Guide.)
Chapter 3, "Optional Equipment," in the Reference Guide.
Reference Guide.
Chapter 2, "Basic Operations," in the Reference Guide.
Press [Copy].
Regular Copy Basic Features Screen
(Reset).