● If you want to add a cover:
❑
Press [Add Cover] ➞ [Next].
❑
Select whether to copy on the cover page ➞ press [Next].
❑
Select the paper source to use for the cover page ➞ press [Next].
If you selected the paper to use for the cover from [Stack Bypass Settings],
select the paper type ➞ press [OK].
IMPORTANT
•
You must select the same paper size for the cover page as that used for copying
the main document.
•
If you are using Heavy 1 or Heavy 2 paper for the cover sheets, you can only print
on the inside of the front cover or inside of the back cover.
•
Only 17 to 28 lb bond (64 to 105 g/m
•
Only the following paper can be used for the cover pages, if you are printing on the
cover pages:
- If [Print] is selected for <Front Cover> or <Back Cover>:
17 to 28 lb bond (64 to 105 g/m
- If [Print] is selected for <Front Inside Cover> or <Back Inside Cover>:
17 lb bond to 80 lb cover (64 to 220 g/m
NOTE
•
If you are loading the paper for the cover page into a paper drawer, you must load
the paper face up.
•
If you are loading the paper for the cover page into the stack bypass, you must load
the paper face down.
2
) paper can be used for the main document.
2
)
2
)
4-23
Booklet Mode
4