Combining Multiple Batches of Originals with Different
Copy Settings (Job Block Combination)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Combining Multiple Batches of Originals with Different Copy Settings," on p.
4-107.
IMPORTANT
•
You can use the Cover/Sheet Insertion mode for the combined document. You cannot
use the Cover/Sheet Insertion mode for each batch of originals.
•
If you use the Job Block Combination mode, the Job Build mode is automatically set for
each batch of originals. You cannot use the Job Build mode for the combined document.
•
You cannot make an Interrupt copy while copying with the Job Block Combination mode.
•
You cannot store the Job Block Combination mode in Standard Settings.
•
You cannot store the Job Block Combination mode in Mode Memory.
•
You cannot recall the Job Block Combination mode.
1
7
2
7-86
Making Copies with Job Done Notice (Others)
Press [Others] ➞ [Job Block Combination].
Press [Set] ➞ specify the copy settings for the combined
document ➞ press [OK].
If you select special features before setting the Job Block Combination mode, the
selected special features will be retained for the combined document.
For instructions on specifying copy settings and the available combinations of
settings, see chapters 3 and 4.