IMPORTANT
•
You cannot copy highly transparent originals, such as transparencies, in the Auto XY
Zoom mode. Manually specify the copy (zoom) ratio for these types of originals.
•
If you set the Auto XY Zoom mode, select the paper size using the Manual Paper
Selection mode. If you do not select a paper size, paper drawer 1 is automatically
selected and the copy (zoom) ratio is set to match the size of the paper loaded in that
drawer.
•
If you set the copy (zoom) ratio in the Auto XY Zoom mode, Auto Orientation is not
performed.
NOTE
•
The Auto XY Zoom mode is available for the Copy function only.
•
If you notice a difference between the copy (zoom) ratio and the actual print size, you can
try to eliminate this error by making a Zoom Fine Adjustment in Adjustment/Cleaning
(from the Additional Functions screen). (See Chapter 4, "Customizing Settings," in the
Reference Guide.)
Copying
1
Place your originals ➞ press [Copy Ratio].
If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p.
3-9.
2
Press [XY Zoom].
Changing the Copy (Zoom) Ratio
3
3-23