● To copy on an envelope loaded in the stack bypass:
❑
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already
selected for the current or reserved job, press [Stack Bypass Settings] to
specify the desired paper size/type.
❑
Press [Envelope].
❑
Select the desired envelope type ➞ press [OK].
IMPORTANT
•
If the envelope type is not set correctly, a paper jam will occur.
•
If you use envelopes that have glue attached to their flaps, the glue may melt due to
the heat and pressure of the fixing unit.
•
If you select [Envelope], the Poster, Finishing, 1 2-Sided, 2 2-Sided,
Book 2-Sided, 2-Page Separation, Cover/Sheet Insertion, Booklet, Transparency
Interleaving, Image Combination, Form Composition, or Job Block Combination
mode cannot be specified.
❑
Press [OK].
2
Press [Done].
1-17
Paper Selection
1