Table of Contents
Advertisement
Programming Overview
Describes currently selected
menu option
Navigating in the Menus
Rev 1.00
After entering the correct password, select Menu to enter the Main Menu (see
Or you can select Easy Configurator and go to
quick setup. Use the control buttons to move around the screen. Highlight a menu option,
then press Enter to select it. As you highlight each menu option, the dialog box at the
bottom describes the current selection.
Figure 4-1
Main Menu
While you are using Program mode you can control the cursor on the screen with the
control buttons on the front panel. The control buttons may be used to move to different
parts of the screen, to scroll through a list, or to add text to a report. The part of the screen
that is active—and will be affected by the control buttons—will always be outlined by a
selection box. See
Table 2-1
Some Program screens have boxes where you can change the text (for example, the title
of a new report, or the camera title). When you want to change the text on screen, use the
cursor controls to highlight the text and press Enter to open the Text Editor.
For all settings, press Enter to accept the change and to leave the setting mode so that you
can move to another area of the screen.
Method One: Cursor Controls
1.
Highlight the box or line you wish to edit. Press Enter. If the field requires the user to
input text, the Text Entry Screen will open.
Chapter 5, Easy Configurator
for more information on the front panel control buttons.
20
Figure
4-1).
to perform a
Document 900.0261
04/05
Advertisement
Table of Contents
