Setting Up Simple Timelapse; Figure 12-1 Timelapse Recording Screen - Honeywell HDVR Reference Manual

Timelapse Recording Setup

Setting Up Simple Timelapse

We recommend that
you enable Autobreak.
Timelapse clips will be
separated into
searchable hourly,
daily, or 15 minute
chunks.
Displays disk storage
recording to record rate and
image quality settings
Set global record rate
and compression
settings
Set this to disabled
for continuous
timelapse recording
Rev 1.00
The Simple Timelapse mode allows you to set the HRDV16/8 for 24 hour, seven days a
week timelapse recording.
To store timelapse clips in the timelapse partition of the hard disk only—that is, motion
detection is not enabled— do the following:
1. Enable timelapse for Simple Setup (MENU
2. Set the record rate and image quality (MENU
Figure 12-1 Timelapse Recording Screen
Note When you adjust the record rate and/or the image quality, the approximate
record time changes in real time.
➤
System Setup
➤
Timelapse Recording).
62
➤
User Preferences).
Set to Simple Setup
Set daily recording times
Set recording times
for holidays
Document 900.0261
04/05