Table of Contents
Advertisement
Using the Quick Report Function
Rev 1.00
Figure 17-7
Setup a Report to Run Automatically Screen
2.
Set the Archive field to Disk or Tape.
3.
Highlight Select Reports, then press Enter.
4.
Use the
and
control buttons to select a report. Press the Camera 1 button to
place a check mark by the desired report to mark it to run automatically. Press the
Camera 1 button again to de-select this report.
5.
Select and mark all reports you want to archive automatically.
6.
When you have selected all the desired reports, press Enter.
7.
Set the Report Recording Time.
8.
Select Accept, then press Enter to confirm your settings and exit this screen.
Note
Live recording continues while you run a Quick Report.
The Quick Report function allows you to bypass the Main Menu to run a report. You can
now get the information you need quickly without having to stop recording.
1.
Press FUNCTION + MENU on the front panel.
2.
Enter a user name and password when prompted.
123
HRDV Reference Guide
Document 900.0261
04/05
Advertisement
Table of Contents
