Table of Contents
Advertisement
Video Playback and Searching
Reports
Field
Date and Time
Camera
Time-lapse
Event
Go To
Motion
Search
Reports
Rev 1.00
Select Reports and press Enter to run a Quick or Existing report (see
Report
Function, page
123
The following table describes the fields on the Go To search screen.
Description
Define the date (month, day, year) and time (hours, minutes, seconds, AM/PM) of
the video to be played back. As the fields change, video in the background changes
to match the new parameters.
Define the camera to display during play back. As the fields change, video in the
background changes to match the new parameters. Options are:
Camera 1 to Camera 16, Any Cameras, Quad
Select this check box to search time-lapse video clips only in the current search. As
the fields change, video in the background changes to match the new parameters.
Select this check box to search event video clips only in the current search. As the
fields change, video in the background changes to match the new parameters.
When selected the HRDV will play back the video that matches the specified date,
time, camera. Initially the video plays back at normal forward speed (real-time
speed).
Note
If Timelapse is selected and a Go To performed, you can play back video
like one big VCR tape without having to jump from clip to clip.
If Event is selected and a Go To performed, you may only be able to play
back video from within a single, short video clip.
When selected the Report Zone Layout screen displays (see
on page
118
for more information). Enter the specific criteria for your motion search
as described in the table on
a report list with the matching motion search results, or select Exit to return to the
Go To search screen.
Select to open the Search screen (see
page
107
for more information). Use this screen to perform a more specific search
for video clips. Enter the specific criteria for your search as described in the table on
page
107. Select Play and press Enter to generate a report list with the matching
search results, or select Cancel to return to the Go To search screen.
Select to run a report and generate a list of clips that fulfill the specific report criteria.
A screen asks you to run either a Quick or Existing report, select your preference
and press Enter. See
Existing
Report, page
reports, respectively. Once a list is generated, select the clip to be played back and
press Enter.
and
Running an Existing
Report, page 124).
page
118. Select Search and press Enter to generate
Searching for Video Clips to Play Back
Using the Quick Report Function
124
for more information on running Quick and Existing
106
Using the Quick
Motion Report Criteria
on
on page
123
and
Running an
Document 900.0261
04/05
Advertisement
Table of Contents
