Table of Contents
Advertisement
Video Playback and Searching
Lock to One Camera
Autobreak
Rev 1.00
Table 16-1
Video Monitor Control Buttons
Control buttons
Description
,
Clip playing forward or reverse with maximum speed or at end
or beginning of clip.
Clip playing forward or reverse at turbo speed.
MENU
Start Easy CD Burn Wizard (if you have a CD-RW option
installed).
You can also jump to the next or previous clip by pressing
3.
When you have finished the current view session, press Enter to return to the clip list.
Note
To archive an image to an archive drive, you must have previously set up an
archive drive (see
the Check archive drive option on the Search screen, as this would only
show you previously archived clips.
When you play back a video clip that has recorded multiple cameras at the same time and
you select one camera to review and then press the left or right arrow button to jump to the
next or previous video clip, you will stay locked on that one camera. This feature must be
enabled on the User Preferences screen (MENU
To make searching for timelapse clips easier, the HRDV16/8 has an Autobreak option that
automatically stores timelapse recording into individually searchable chunks of video. You
can set the Autobreak option to hourly, daily, 15 minutes, or no autobreak (one continuous
single clip). For more information, see
A setting of Daily creates a single daily timelapse clip for each day starting at 12:00
midnight. This allows you to do a simple search for incidences based on a particular day.
Instead of jump searching multiple 15-minute portions of hourly clips (as with the Hourly
setting) a user can scan through a single day clip using turbo mode on the jog wheel. When
viewing an incident, a reviewer can slow down and view the incident as required.
Configuring Storage
Setup, page 47) and have not enabled
➤
System Setup
Chapter 9, User
Preferences.
110
or
while viewing a clip.
➤
User Preferences).
Document 900.0261
04/05
Advertisement
Table of Contents
