Web Client Operation 6 Web Client Operation • All the operations here are based on HD-DVR-1016. Note • There might be slight differences in the interface due to the updated series. Network Connection Before the web client operation, please check the following items: •...
Page 3
Honeywell Figure 6-1 Sample of IE Login Input your IP address here. A system pop up with warning information will ask you if you want to install webrec.cab control. Please click yes button. If you can’t download the ActiveX file, please modify your settings as follows, enable or prompt all disabled Active X items.
Page 4
Web Client Operation Figure 6-2 The Internet Options Window...
Page 5
Honeywell Figure 6-3 The Settings for ActiveX After installation, the interface is shown as below. See Figure 6-4 Please input your user name and password. Default factory name is admin and password is admin. For security reasons, please modify your password after Note you first login.
Page 6
Web Client Operation Figure 6-4 The Web Login Window After you logged in, you can see the main window. See Figure 6-7 This main window can be divided into the following sections. Section 1: There are five function buttons: configuration, search, alarm, about, and log out .
Honeywell Figure 6-6 The Preview Window Switch Menu Figure 6-7 The Main Menu of Web Client Section1 Section 3 Section 2 Section 5 Section 4 Real-Time Monitor In section 2, left click the channel name you want to view, you can see the corresponding video in the current window.
Page 8
Web Client Operation • 1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. Right clicking mouse system restores original status. • 2: Change show mode: resize or switch to full screen mode. •...