Figure 20-1 Text Ports Screen - Honeywell HDVR Reference Manual

Text
Field
Enable
Baud Rate
Stop Bits
Data Bits
Parity
Flow Control
Scroll
Control Character Filter
Skipped Characters
Rev 1.00
Figure 20-1 Text Ports Screen
The following table describes the fields on the Text Ports screen.
Description
You must enable this box for each connected port (up to four) before the system
accepts information from that port.
Options are:
300, 1200, 2400, 4800, 9600, 19200 (default), 38400, 57600
Set the appropriate number of stop bits.
Set the appropriate number of data bits.
Set the desired parity.
Options are:
None, Hardware (default), XON/XOFF
The display text scroll rate. Options are:
0 to 10 (default is 2)
Enables the text port filter. In situations where POS transaction data displays all
over the video—that is, the POS server or cash register mixes all transaction data
and sends it out one common serial port—you can eliminate the control
characters for the different font sizes and styles, leaving only the transaction data
with carriage returns and line feeds occurring where they should.
Number of characters to not display after the defined control character filter
occurs.
144 Document 900.0261
04/05