Field (Cont'd)
Actions
Record cameras
Zone Setup
Setting Up Motion Zones
Rev 1.00
Description
Choose whether or not the HRDV16/8 should beep or trigger the Alarm Output
contact (to activate an external light, bell, and so on).
Define which cameras (16 cameras for HRDV16, 8 cameras for HRDV8) will record
motion event video clips. These are stored in the event disk drive partition.
See
Setting Up Motion
Use the Motion Zones screen to:
•
Assign screen areas for up to four independent motion zones per camera
•
Set individual sensitivities
•
Set size of target (trigger size)
Testing the effectiveness of the motion triggers is key for optimal disk utilization.
When you use the motion detection function, a reference image is saved to provide a
background picture for motion detection. This reference image automatically updates at
regular intervals so that, for example, gradually changing light conditions will not trigger a
motion detection alarm. This reference update process is automated for optimal system
performance.
Access the Motion Zones screen as follows: MENU
➤
Events
Zone Setup.
Figure 13-2
Figure 13-2
Zone Layout Screen per Camera
Zones.
➤
displays.
79
HRDV Reference Guide
➤
Event Recording
Motion
Motion Detection screen
When motion is detected, the
squares turn red.
Document 900.0261
04/05