Figure 6-1 Select A User Screen - Honeywell HDVR Reference Manual

User Access
Rev 1.00
Use the Change Password menu to:
• Change any of the user identifications and passwords
• Configure the permissions supported with each user
You can also enable or disable the password function globally (for all users) from the User
Preferences menu (see User Preferences Screen
To change a user password:
1. On the main MENU, use the Control buttons to move to the Change Password
option, then press Enter.
Figure 6-1 Select a User Screen
2. Press one of the Camera buttons for the desired user (for example, Camera 1 selects
User 1). The following dialog box displays.
3. Enter a new numeric password. The password can be any combination of digits 1 to
4, up to 10 keystrokes long. Use the Camera buttons to enter your new numeric
password.
Note If you do not want to change your password at this time, press
the Cancel button, then press Enter.
4. Press Enter. The Select a user dialog box re-appears.
5. Re-enter the same user name. The Confirm your new password dialog box displays.
6. Confirm your new password by re-entering the password.
on page 43).
Figure 6-1 displays.
30
▼
to highlight
Document 900.0261
04/05