Table of Contents
Advertisement
Report Generation
Field
Motion Zone Layout Grid
Running a Report
Rev 1.00
Description
Move cursor to area to open the layout grid. Press Enter to initiate a flashing cursor
in the center square of the grid. Squares with a 1 inside are selected to detect
motion. Empty squares are de-selected.
To activate the currently selected square press camera 1. Using the directional
arrows, each subsequent empty square moved to will be automatically selected.
Press Enter when you are done activating or press camera 2 to de-activate squares.
To de-activate the currently selected square press camera 2. Using the directional
arrows, each subsequent activated square moved to will be automatically
de-selected. Press Enter when you are done or press camera 1 to activate squares.
Press camera 8 to de-activate all selected squares.
When you have finished setting the motion report criteria, select OK to return to the Create
New Report screen, then Accept to return to the Reports main menu.
To see your new report, press Run a Report. The report you created displays on the Select
Reports drop-down list.
After you create a report, you may run it from the Run a Report screen. Access this screen
➤
as follows: MENU
Reports
Figure 17-6
Run A Report Screen
To run a report:
1.
Use the control buttons to scroll through the report list.
2.
Highlight the report you want to run, then press Enter. The search and extraction
process based on your search criteria begins.
➤
Run a Report.
Figure 17-6
120
displays.
Document 900.0261
04/05
Advertisement
Table of Contents
