Table of Contents
Advertisement
Clock Setup
Field
Enter a new date and time
Clock Format
Daylight Saving Time
Text Insertion
Synchronization
Rev 1.00
3.
Press Enter to select an item; then use the
also use the inner jog wheel to change the value.
4.
Press Enter to confirm a value.
Description
Set the system time and date.
Activate a box by pressing Enter, then press
the value. Press Enter to accept the value.
Set the time in 12-hour (AM/PM) or 24-hour format. Use the control buttons or jog
wheel to cycle through the options:
DD/MM/YY HH:MM:SS AM/PM (12-hour clock format)
DD/MM/YY HH:MM:SS (24-hour clock format)
MM/DD/YY HH:MM:SS AM/PM
MM/DD/YY HH:MM:SS
Enable (default) or disable Daylight Saving Time for your geographic location.
Time varies from one region to another. If enabled, the HRDV16/8 automatically
adjusts itself by one hour in the Spring and one hour in the Autumn.
Options are:
North America, Europe, Australia
If a user is operating the HRDV16/8 when the change to Daylight Saving time takes
place, the time change does not take effect.
Also, if the HRDV16/8 is recording an event at the time of the Daylight Saving time
change, recording temporarily stops, the time changes, and then the recording
begins again.
Enable or disable (default) text insertion synchronization. Must be enabled to
change the date and time fields.
Enable text insertion synchronization ONLY if you want the HRDV16/8 set to the
date and time used by one externally connected device.
5.
When you have finished entering the correct date and time, press SET to reset the
HRDV16/8 clock.
6.
Move to the Accept button and press Enter to save changes and exit to the Main
Menu.
and
or
34
to change the value. You can
or the jog wheel to change
Document 900.0261
04/05
Advertisement
Table of Contents
