Viewing And Changing Modem Settings; Figure 8-7 Serial Devices Tab Showing Internal Port-Modem Data - Honeywell Rapid Eye System Administration Manual

Viewing and Changing Modem Settings

Port icons
Modem icon
For an external
modem, drag the
modem icon to
the port icon.
Document 800-07769 Rev A
02/11
Caution Changing modem values in the next step can make the unit unavailable for
dial-up connection. If you are unsure, see your Multi SA.
1. Continue or start a
Maintenance Session
wait until a System Operational message appears.
2. Click the Serial Devices tab.
Note Internal modems are only included with Multi-Media NTSC units. PAL units
will need an external modem for use with a dial-up connection.
3. Click the Internal Port - Modem icon. Boxes appear in the right half of the Serial
Devices tab (Baud Rate, Wait for Connection, and so on). The box names and their
default values are listed in
4. You have the option of changing the values, as needed.
Figure 8-7 Serial Devices Tab Showing Internal Port-Modem Data
Rapid Eye DVR System Administrator Guide
for the Rapid Eye Multi-Media site. Please
Table 8-4.
151