Touring Many Sites; Preliminary Checklist - Honeywell Rapid Eye System Administration Manual

Touring Many Sites

Preliminary Checklist

TIP!
Document 800-07769 Rev A
02/11
A Rapid Eye Multi-Media system can be set to show all of the video and data from a series
of sites, one site at a time, automatically. This is a common function of a CCTV security
system. Admin is used to setup the site tours. View is used to run the tours.
A site tour, involving multiple Rapid Eye sites is very different from other types of tours,
such as:
• PTZ tours, which only include one camera, at one site. See
Setup, page 93, to see how to setup a PTZ-camera tour.
(PTZ)
• LocalView tours, which uses LocalView to tour multiple cameras at one site. See
the LocalView online help for more information.
• Public display monitors, which displays multiple cameras at one site by
connecting a monitor to one Multi-Media unit. See
Public Display Monitor
Before Defining a Site Tour
Your Multi-Media System Administrator (Multi SA) needs at least two sites to define a tour.
See on page
Adding a Site
Live session is as effective as a Site tour. See the
Recorder Remote View Operator
A site tour is not listed in the View application until more than one site is assigned to
it. Design a site tour using two or more Rapid Eye units.
System Password
The system password should be the same for all of the Rapid Eye sites selected for a site
tour (see
System Password
on page 154.
for more information. For systems using one site only, a
35
Rapid Eye™ Multi-Media Digital Video
Guide, for more information.
on page 182).
13
Pan, Tilt, and Zoom
Using Monitor Output 1 as a
251