Dynamic Host Configuration Protocol Without Dns; Figure 3-3 Localview Network Settings: Dhcp; Figure 3-4 Inputting The Site Name From Localview Into A Dhcp Connection - Honeywell Rapid Eye System Administration Manual

Connecting to a Rapid Eye Unit

Dynamic Host Configuration Protocol Without DNS

44
Figure 3-3 LocalView Network Settings: DHCP
Note In LocalView, the Site Name field shows what can also be called a unit's
computer name or network name in the Admin software. The Site Name
assigned in Admin is a label to identify a unit when using the View application.
2. Click Refresh. Using the Admin software, start
3. In the Add Connection window, select Use Existing Network Connection (see
Figure 3-4).
4. In the IP Address field, enter the site name used in LocalView, as indicated in
of this procedure.
5. You have the option of changing the connection name ([site name] ->
Network), to indicate the use of a dynamic IP Address, by entering the Connection
Name. For example,
Figure 3-4
6. Click Save and Close. For a report, see
Figure 3-4 Inputting the Site Name from LocalView into a DHCP Connection
While Connections, page 41:
Working with
1. Use LocalView to enable DHCP on the Rapid Eye unit (see
is not used in this type of connection.
2. Click Refresh.
Working with
shows that DHCP was added.
Connection Report
Entered by the
operator
Connections, page 41.
step 1
on page 56.
3-3). The Site Name
Figure