Changing The System Password On Each Multi-Media Unit; Updating Users On System Password Changes; Figure 10-3 System Password - Honeywell Rapid Eye System Administration Manual

Security for a Multi-Media System
Click to change
the system
password

Changing the System Password on Each Multi-Media Unit

Updating Users on System Password Changes

184
- or -
• Press the F8 key.
2. Enter a password in the System Password field, as shown in
double-quote (") character cannot be used.
Figure 10-3 System Password
3. Re-enter the password in the Confirm Password field.
4. Click Save and Close to set the system password.
1. Using View, start a
Maintenance Session
password change. Either:
• Right-click the site name (on the Site tab) and select Maintenance from the
shortcut menu.
• Select the site, then click the Maintenance command in the Actions menu.
• Select the site, then click
2. Click the Security tab in the Maintenance window.
3. To update the site's security with the Multi-Media Central database, click Update
Security on the Security tab. You have the option of checking the status of the site's
system password, reported in Admin. See
4. You have the option of ending the
on page 71.
Maintenance
5. Repeat to
step 1 step 4
The Multi SA needs to tell View operators, who are logged on, to refresh their copy of the
Multi-Media database, or they will not be able to connect to Rapid Eye sites. See
on page 274. Note that only users logged on to View 24/7 need to be
a Local Database
warned of this. Refresh is automatic as users log on to use the View application.
for a site that is designated for a system
on the toolbar.
Table 10-2
Session, as explained in
Maintenance
for each Multi-Media unit in your system.
10-3. A
Figure
on
page 185.
Ending
Refreshing