Using A Ptz Camera; Displaying The Ptz Dartboard Control; Table 6-1 Ptz Drivers For Controllers And Domes - Honeywell Rapid Eye System Administration Manual

Pan, Tilt, and Zoom (PTZ) Setup
a
Driver (name)
Bossware
Honeywell Fixed Camera
Intellibus-PTZ
Javelin 308
Kalatel
Pelco D
Pelco P
Rapid Dome/Orbiter
SensorMatic RS422
Ultrak (using VCL)
Ultrak KD6/Honeywell HD6
a
The drivers are not listed alphabetically in the software. A driver can be used with domes other than those
listed. For other domes, controllers or PIT devices, consult their accompanying documentation.

Using a PTZ Camera

Displaying the PTZ Dartboard Control

96
Table 6-1 PTZ Drivers for Controllers and Domes
Baud Rate
19200
9600
38400
9600
9600 or 2400
4800, 9600, 2400
2400
9600
4800
2400
9600
Three PTZ controls are available to make PTZ commands:
• a dartboard-like control,
• a rubber-band control (also called pull mode control) and
• a zonal mode control.
All are available while running a Live session or while using LocalView. The right to use a
PTZ camera is granted in the operator's Multi-Media account (see
on page 173).
Rights to an Account
The PTZ dartboard control can be obtained in three situations:
• During a
Maintenance
video tab. See the first steps of
• During a Live session, select or add a video stream from a PTZ camera. Click Enable
PTZ Control ( ).
• In LocalView, a PTZ button is shown when a Live tab is selected. It is available when a
PTZ camera is selected.
Support for Domes/Controllers/PIT Devices
PIT device, to which domes are connected
Honeywell HCU484
Honeywell ACUIX dome camera
Javelin 308 Controller
Kalatel KTD 312 Cyberdome
Pelco D
Pelco P
Honeywell RapidDome or Orbiter
SensorMatic RS422: Delta and Speed
Honeywell Ultrak (configured as VCL)
Honeywelll KD6, HD6, HD6i
Session, when you select PTZ, the PTZ control displays on the
Camera, page 95, above.
Enabling a PTZ
Granting More or Less