Pan, Tilt, and Zoom (PTZ) Setup
Pulling the Rubber-Band
Using Zonal Mode
98
Figure 6-5
Dragging the Mouse Pointer in a PTZ Camera Window
On the video image, click and drag the mouse. A line is overlaid on the video. Lengthening
the line increases the PTZ camera's panning or tilting speed. See
•
Pan. To pan right and to tilt down, slightly, drag the pointer from the upper left to the
lower right. In View, the line is a single color; here, it is highlighted for illustration.
•
Zoom. Use the wheel on the mouse. If the mouse does not have a wheel, see
the Dartboard Control
•
Presets and other commands. In a Live session and in LocalView, right-click on a
PTZ camera's video to obtain a menu of PTZ commands and video resolution
commands. In a
Maintenance
Figure 6-6
Using PTZ Zonal Mode
3
2
1
•
To pan or tilt, move the mouse through the PTZ camera's window until the pointer
changes to a numbered arrow and click the mouse button.
Zonal Mode for panning left. For continuous panning or tilting, click the arrow furthest
from the center.
•
To stop continuous panning or tilting, move the mouse through the PTZ camera's
window until the pointer changes to an octagon and click the mouse button.
•
To zoom, use the wheel on the mouse. If the mouse does not have a wheel, see
the Dartboard Control
on page 97.
Session, use the commands on the dartboard.
Move the mouse over the PTZ camera window until the
pointer changes to a numbered arrow. Click the mouse
to pan or tilt in that direction. Higher values make the
camera pan or tilt more than lower values.
on page 97.
Figure
6-5.
Using
shows the
Figure 6-6
Using