Creating A Multi-Media Database; Figure 15-3 Admin Logon And Creating A Database - Honeywell Rapid Eye System Administration Manual

Creating a Multi-Media Database

TIP!
Document 800-07769 Rev A
02/11
Creating a Multi-Media database is a rare occurrence. Only one Multi-Media datab ase
is needed for all of the Rapid Eye sites in your system. Honeywell recommends using
the default REMCentral.mdb if you plan to use only one Multi-Media database. The
installers of your system may have already created a database to test the installation.
Using the Admin - Logon Window to Create a Database
If the installers did not supply you with their Multi-Media database, you can use Admin to
create an empty Multi-Media database while you are logging on.
Figure 15-3 Admin Logon and Creating a Database
To obtain an empty Multi-Media central database, either:
• For an MS Access compatible format, see
Multi-Media Database
- or -
• For a SQL server compatible format, see
Following Log On to Admin
The next time that you logon to Admin, the same Multi-Media database is used.
Rapid Eye DVR System Administrator Guide
Creating an Empty MS-Access Compatible
on page 266.
SQL Server Template
on page 267.
265