Dvr Internal Modem Default Settings; Testing A Dial-Up Connection In The Field; Table 2-3 Default Settings Of The Internal Dvr Modem - Honeywell Rapid Eye Hybrid LT Installation Manual

Hide thumbs Also See for Rapid Eye Hybrid LT:

Table of Contents

Installation

DVR Internal Modem Default Settings

Plug the other connector in a telephone outlet.

Note

Connect the DVR to a telephone line only if a dial-up connection is planned.

Caution

Power down the DVR before connecting hardware to it. See

on page 31.

For Telco communication, a data-grade (fax) telephone line is preferable to a standard line.

Special features, such as call waiting, should not be available on a telephone line used by

a Rapid Eye Hybrid LT DVR.

Note

For dial-up connections, LocalView is not needed to help set up a remote

connection.

You are ready to power-up the camera(s) and the DVR. See

on page 30.

Table 2-3

Default Settings of the Internal DVR Modem

Field name

TELCO Port

Baud

Wait

Prefix

Initialization

Dialing

Using a standard telephone line, dial the number used to reach the DVR modem, to listen

for an answer tone.

Value

Internal or Port 1

115,200

Powering Up

Powering the Hybrid LT DVR

Table of Contents