Connecting To A Rapid Eye Unit; Working With Connections; Figure 3-1 Adding A Dial-Up Connection To A Site - Honeywell Rapid Eye System Administration Manual

Connecting to a Rapid Eye Unit

Working with Connections

Document 800-07769 Rev A
02/11
Coordinating with the Installer
If a connection was set up by the installer and you are accessing the Multi-Media
database created by the installer, the connection will be listed under Connections to the
Site (see 3-1). One connection, or many, can be setup; for example, to operate a
Figure
unit through a network, and by local dial-up.
Using Admin Software
Admin software is used to set up, or modify, a connection to a Rapid Eye unit.
shows how to add a connection. Add a connection while
while Site, page 35. A connection is made using the View software.
Adding a
Figure 3-1 Adding a Dial-Up Connection to a Site
3
Figure 3-1
Site, page 37, or
Updating a
41