Making Optimized Resolution And Frame Rate Settings; Figure 5-6 Automatic Performance Maximization Window; Figure 5-7 Configure Automatic Optomizations Command - Honeywell Rapid Eye System Administration Manual

Video Feed Setup
Automatic options
for Performance
Maximization

Making Optimized Resolution and Frame Rate Settings

84
Automatic Display of Maximization Tool
If settings are set too high, the Automatic Performance Maximization window is displayed
(see
Figure 5-6).
Figure 5-6 Automatic Performance Maximization Window
The list of optimization options changes, depending on:
• The use of NTSC or PAL equipment.
• The number of cameras connected to the unit. Optimization cannot be used if the
cameras are not connected contiguously. See
In the Automatic Performance Maximization window, double-click an automatic option (see
Figure 5-6).
Manual Display of Maximization Window
To display the Automatic Performance Maximization window, click Configure Automatic
Optimizations, after right-clicking on the Recording tab. See
Figure 5-7 Configure Automatic Optomizations Command
Video, page 83.
Optimizing Recorded
Figure 5-7.