Discovering Sites On The Archival Server; Figure 12-13 Add Archival Server Window; Figure 12-14 Discovering Sites On An Archival Server - Honeywell Rapid Eye System Administration Manual

Discovering Sites on the Archival Server

Document 800-07769 Rev A
02/11
Figure 12-13 Add Archival Server Window
Note The Server Location can be a local folder or a network share path. Data will
backup to the working directory (location where the application is installed)
by default if the server location is not accessible. If data has been backed up
to the working directory, you can choose the working directory in this step as
the Server Location or manually copy and paste the files to the proper
location.
5. Select an archival server location in the Browse for Folder dialog box and click OK.
6. Click Save and Close.
Note Select an archival server and click
can also add another server (
1. Launch the View application and select the Archival tab. The archival policies and
servers that have already been configured are listed here.
2. If you have recently added policies or servers, you should click Refresh to update the
lists of policies and servers.
3. Select an Archival Server and click Discover Sites (
4. All the sites found on the archival server will be listed after clicking Discover Sites
(see as an example).
Figure 12-14
Figure 12-14 Discovering Sites on an Archival Server
Archival Servers
before discovery
Rapid Eye DVR System Administrator Guide
to modify the server's options. You
) or delete a server (
Archival Servers
after discovery
).
).
245