Honeywell Rapid Eye System Administration Manual page 187

TIP!
Document 800-07769 Rev A
02/11
If there is only one Multi-Media unit used by your organization, do not use the
following procedure. Please use
1. Check your Multi SA's password records to find the current system password on your
Multi-Media system. If the password is unknown, follow
Units, page 186, to change the system password on all units first.
2. Run Admin, to access the System Password window. Either:
• Click on the Admin toolbar.
• Click the System Password command in the File menu.
• Press the F8 key.
3. Delete the asterisks in the System Password and Confirm Password boxes. The two
boxes in the System Password window should now be empty (see
4. Click Save and Close.
5. Using View, start a
Maintenance Session
system password. Either:
• Right-click the site name (on the Site tab) to select Maintenance from the
shortcut menu.
• Select the site. Click the Maintenance command in the Actions menu.
• Select the site, then click
6. Click the Security tab in the Maintenance window. Click Update Security. End the
Session. See
Maintenance
7. You have the option of powering down the Multi-Media unit and disconnecting it from
your network or its telephone line.
8. Run Admin to access the System Password window.
9. Enter the system password used earlier in the System Password field (the password
that was removed in
step 1
Password field.
10. Click Save and Close.
11. To follow-up:
• The Multi SA may need to tell some users that they need to refresh their copy of
the Multi-Media database. See
• You have the option of deleting the site in the site list, as explained in
on page 37.
Site
Caution If the system password is not removed from a unit, that system password
will need to be remembered when another site definition is created for that
unit. The system password is also needed if you delete a site definition by
mistake. See
Adding a Site
Rapid Eye DVR System Administrator Guide
Remove Password from All
for site(s) from which you want to remove the
on the toolbar.
on page 71.
Ending Maintenance
of this procedure). Re-enter the password in the Confirm
Refreshing a Local Database
on page 35, and
Deleting a Site
Units, page 186.
Remove Password from All
Figure 10-4).
on page 274.
Deleting a
on page 37.
187