View Software Only (View Operators); Admin And View Software (Multi Sa); Installing Rapid Eye Software On Windows 7 - Honeywell Rapid Eye System Administration Manual

View Software Only (View Operators)

Admin and View Software (Multi SA)

Installing Rapid Eye Software on Windows 7

Document 800-07769 Rev A
02/11
Personnel who operate Multi-Media units to monitor video, respond to alarms, and make
video clips only need View software on their PCs. Use the View CD-ROM to install the View
application without the Admin application.
The system administrator of your Rapid Eye Multi-Media system (Multi SA) needs access to
Admin software and View software. Use the Admin CD-ROM that came with your unit to
install both applications. If security is important to your organization, Honeywell
recommends that the Admin CD-ROM be used only on your Multi SA's PC.
ActiveX Control Pad
If Rapid Eye Admin and View software is installed on a PC running Windows 7 that does not
have the FM20.dll file in folders C:\Windows\System32 or C:\windows\SysWOW64 requires
ActiveX Control Pad to be installed on the PC. ActiveX Control Pad will need to be installed
before the Rapid Eye Installer will continue installing the Admin and View software (see
Figure 1-1).
Note The Windows library file, FM20.dll, is required to run Admin and View software
on your PC. This file is not re-distributable and therefore must be obtained by
installing Microsoft ActiveX Control Pad or Microsoft Office. For details on the
distribution and usage of FM20.dll, go to
http://support.microsoft.com/kb/224305.
Rapid Eye DVR System Administrator Guide
25