Tracing Events; Table 10-6 Event: Default Settings For Log And Alarm - Honeywell Rapid Eye System Administration Manual

Source Event
Session: connect, reject and disconnect
View Operator event
Maintenance: configuration, security, system files,
synchronize time, clear storage, clear stream
Outputs: activate, deactivate
System: run-time failure, self-restart, reboot, no video
Multi-Media Unit
recording, time server unusable, no synchronization in 24
event
hours, excessive system clock drift, SMART disk failure
Inputs: activate, deactivate
Outside World event
Video: signal lock, signal unlock
Motion: Not on Event tab, on the Video tab
Tamper Detection: On the Video tab (not on the Event tab) off
User-defined: Not on Event tab, on the Serial Devices tab off
Customer-device
event

Tracing Events

Document 800-07769 Rev A
02/11
Table 10-6 Event: Default Settings for Log and Alarm
Like most of the Multi-Media security features, tracing events caused by a
or
event Multi-Media Unit event
these events occur. Alarms can be sent to specific PCs. See
page 215. Tracing these events is performed on a site-by-site basis.
Use tracing to monitor:
• Power outages. A site that regularly reboots or has long gaps in its recorded video
archive can be monitored for power outages.
• A breach to site security. You can be warned about some damage, vandalism or
destruction to a Rapid Eye site, due to hurricanes, fire, criminal activity, and so on.
• Operator error. Tracking critical operator actions that result in missing video can help
when unidentified problems start occurring and you suspect operator error.
Who Can Trace a Multi-Media Unit or View Operator Event?
By using the Administrator account—or an account based on it—your Multi SA has the
Modify configuration right automatically and can record or report these or other events.
To authorize other users to do so, the Multi SA can add the Modify configuration right to
their user account. With this right, the operator can:
• Start a
Maintenance Session
• Set events: to be logged, to trigger alarms or to be ignored, as needed
• Arm/disarm alarms
Rapid Eye DVR System Administrator Guide
Log
off
All are logged; logging
cannot be disabled
off
All are logged; logging
cannot be disabled
off
off
off
is optional. You can also set a site to produce an alarm if
at a site
Alarm
off
off
off
off
off
off
off
off
off
View Operator
Multi-Media Alarm Stations
on
207